Super Bowl Pennant Banner
Who's ready for the Super Bowl!? Super Bowl Sunday is all about sitting around with good friends, yummy appetizers, and simple decor, so this DIY is quick and easy. Scroll down for the tutorial!
Super Bowl Pennant Banner
What you need
Green Felt
Ruler
Pen
Piece of blank paper
Scissors
White 1/4" Ribbon
Twine
Hot Glue
Directions
1. On an 8 1/2" x 11" piece of paper draw a 5" x 10" x 10" triangle and cut it out. This will be your template.
2. If you are using a large piece of felt, lay it out on your table and place your triange in one corner and trace it, then flip it upside down directly next to it and trace only, two sides, using the third side of the other triangle (see picture above).
3. Cut out 12 felt triangles and lay them on a flat surface next to each other, while stretching your twine across the top of every pennant. Hot glue the twine across the pennant with little dabs of glue and let dry. TIP: Leave at least 12" of twine on both sides of the pennant banner so you can tie it to your table etc.
4. Flip the pennant banner over and add white ribbon down the center of each flag using regular tacky glue. Let dry, then cut the ribbon into a triangle at the bottom of the pennant and cut off any remaining ribbon hanging off the top.
