DIY Bar Trays

Partaaaaaaay. I made fancy shmancy bar trays on last weeks episode of Home and Family! If you missed the epsiode (weekdays 10am/9c - watch!) You can see the tutorial below.

What you need
(4) Gold or Brass 9/16" x 1 1/4" Decorative Corners with screws (sold in sets of 4 at the Hardware store)
(1) 20" x 20" decorative tray with square edges
(2) Gold or Brass drawer handles (fit to your tray)
Drill or Epoxy 6000
(1) chrome restaurant stand (found at any restaurant store $19)
Gold Spray Paint
Felt or fabric (optional)
Scissors

DIY Bar Trays

What you need
(4) Gold or Brass 9/16" x 1 1/4" Decorative Corners with screws (sold in sets of 4 at the Hardware store)
(1) 20" x 20" decorative tray with square edges
(2) Gold or Brass drawer handles (fit to your tray)
Drill or Epoxy 6000
(1) chrome restaurant stand (found at any restaurant store $19)
Gold Spray Paint
Felt or fabric (optional)
Scissors

Directions
1. Place your hardware on the bottom corners of the tray and using a screw driver screw the corners in or use Epoxy 6000 to mount the corners if you don't want to use a screw driver. 

2. Mount your drawer handles in the center of the tray on each side in the same fashion you did the metal corners. Remember if you do not drill these you cannot pick up the tray with these handles. They are decorative only!

3. Spray paint your chrome restaurant stand with Gold spray paint and let dry.

4. Lay your tray on your gold stand or mount with Epoxy 6000 if you want it to be permanent.

5. If desired you can cut a piece of fabric to lay inside the tray (or chic paper like I did with the black tray above with the chevron paper.)